Water Heater Replacement

Water Heater Replacement Idaho Falls- Intro

A water heater is an appliance which is used to heat water above its normal temperature to be used for several purposes. Water heaters are of various types like-normal heaters, hot water heaters, hot water tanks, boilers, heat exchangers, geysers etc. It uses a thermodynamic process to heat the water.Have a look at water heater repair near me for more info on this.

The Need for Replacement

One of the most common household replacement is replacing a water heater. Proper steps should be followed while installing it. When the heater gets old, it starts to consume more electricity and takes more than the required time to heat water. In this way you loose a lot of money. Not only this, an old appliance consumes a lot of useful energy. Hence it is always recommended to replace an old appliance.

How to replace it?

Please follow the steps given below to replace a water heater:-

1- Take a volt meter and check that the electrical disconnect is off. Turn off the gas or electricity to the heater.

2- Take out all the water present in the tank. This is an important step and you should

drain the heater and allow air into the system.

3- Now, with the help of a pipe cutter cut the hot and cold lines to the tank. Always place a bucket underneath the tank for any water which overflows.

4- Remove all the wires and try to understand the connections.

5- Now place the new tank in the required position.

6- Make the hot and cold water connections carefully.

7- Fix the pipes and connectors in place.

8- Now install a brand new temperature and pressure relief valve so that the system lets off excess heat and pressure automatically.

9- Check all the electrical or gas connections so that they work properly. In case of a gas connection, a new union should be used.

The steps are easy to implement but still I would suggest you to hire experienced water heater installation specialists, plumbers, electricians to do the job for you. Remember each and every connection is important so there must be no compromise on the safety. Always use new accessories and pipes when installing a new heater.

Disclaimer:- Every effort has been made to ensure the accuracy of the information but in case of any damages or injuries, the author should not be held responsible.